Choosing Automatic or Manual Foam Hand Soap Dispensers Bottle
In times like these, hand sanitizer has become an imperative part of our daily hygiene. It provides protection against cross-contamination and prevents germs from spreading. For well-being purposes, residential as well as commercial properties are incorporating sanitizer and foam hand soap dispensers bottles.
However, the debate here is which type of sanitizer dispenser should you invest in. Should you go with an automatic foam dispenser or would a manual work better.
Hand and Soap Dispenser – Manual Vs Automatic Dispensers
Choosing a manual or an automatic dispenser greatly depends upon your requirement. Both these dispensers serve the same purpose. Before you go on choosing one, understand the best way to ways your hands.
What is the best way to wash your hands?
According to health experts, it is better to use soap and water to clean your hands than a sanitizer. Sanitizer should be used due to the scarcity of water. In order to fully get rid of the germs, you need to apply soap to your hand and rub it for about 20 seconds. Then wash your hands with clean water.
In case, you do not have access to water, then both the NHS and the Public Healthcare of different countries recommend using a hand sanitizer that has 60 percent or more alcohol content. These sanitizers are more effective in comparison to others.
However, there are certain studies emerging that state otherwise. It now is believed that you can use both with and without alcohol sanitizers.
Since access to water is important for rinsing purposes, therefore you need the soap or foam dispensers to be in proximity of the sink. Thus, making them ideal for high-traffic locations such as bathrooms, washrooms, and kitchens. Of course, if you fill the dispenser with a sanitizer, it will eliminate the need for water.
Difference Between Manual Soap Dispenser and Automatic Soap Dispenser
There are two main categories of a dispenser, may it be a soap, foam, or a sanitizer dispenser. You have manual dispensers, and then you have automatic dispensers. If you use a manual soap dispenser, you will have to apply pressure in order for the product to come up. In most cases, the user has a press a button to release the gel or the liquid.
On the contrary, an automatic dispenser uses touchless technology to suspend the gel or liquid. Once you place your hand under the dispenser, the sensor would detect it. It would then let go of a set amount of liquid or gel.
During these difficult times, installing sanitizer and soap dispensers offer excellent reassurance to consumers, the workforce, and other personnel present with the premises of a commercial building, or a manufacturing unit.
In addition, having dispensers in high-traffic areas gives a good first impression. It directly conveys the message that you are concerned about the well-being of not only of your employees but anyone who comes inside your building.
Regardless of the fact that you want a soap dispenser for your personal washroom, a small coffee shop, or a massive industrial facility, it is important to learn about its downsides and advantages. Doing so would allow you to deliver a practical hand washing solution.
Why Invest in an Automatic Soap Dispenser?
The commercial community prefers automatic soap dispensers. You would commonly see them in high-end environments and executive restrooms including restaurants, airports bars, and hotels. These modern and sophisticated hand soap dispensers would quickly blend into your modern interior.
What more is that they prevent gel or liquid wastage. As the automatic sensor would only release a set amount of liquid. The most impressive point, as well as the selling point of an automatic soap dispenser, is its completely touchless operation.
Since it eliminates the common point of contact, thus it helps in reducing the spread of bacteria and germs between users.
Why Invest in a Manual Soap Dispenser?
Manual soap dispensers are way cheaper in comparison to automatic soap dispensers. For even cheaper alternatives, you can go with the traditional foam hand soap dispensers’ bottle.
What is a foam hand soap dispensers’ bottle?
In order to replace the soap bars, people have been using plastic liquid bottles with a pump on top. These bottles are small and compact. They come in different sizes and shapes. You can even enjoy customized bottles to match the interior of your home.
The basic working mechanism of these pumps is simple and effective. All you must do is press the top of the bottle for it to pump the liquid or the gel out. Although it might look beautiful, these bottles are no longer a feasible option.
One of the major reasons is that they do not have the capacity to hold a lot of liquid. Thus, you would have to refill again and again. Plus, they can become a source for cross-contamination. Therefore, you should use the manual soap dispenser machine instead of the traditional bottle.
Even though they do not incorporate touchless technology, yet they are reliable and effective. Your hands would come in contact with the dispenser to release the liquid. Once you have the liquid on your liquid, you sanitize your hands, and there is no further need for contact. Thus, effectively killing all the germs and bacteria.
In addition, these dispensers are not battery-operated. They would go a long way instead of the automatic dispensers. Lack of smart infrared motion sensors further enhances their longevity, as often these sensors cause trouble for the automatic dispensers.
Since the manual triggering of a lever or a button or more common, thus it is more user-friendly. Something the automatic dispensers lead to confusion as people unfamiliar with the technology have no idea regarding its working mechanism.
Due to this confusion, people often end up waste a good amount of liquid or gel. However, if you want to incorporate an automatic foam dispenser within your commercial facility, it is a good idea to give your employees a hand-up. Provide them with guidelines on how to use the automatic dispenser correctly.
Do bear in mind that a manual soap dispenser would require regular cleaning as people use it while their hands or dirty or after using the toilet. To ensure that the common touchpoint is clean and to prevent cross-contamination, you would have to clean the dispenser regularly. This is not the case with an automatic dispenser.
Other Factors They Are Important
Since good manufacturers such as Fengjie use strong ABS plastic or stainless for the construction of these soap dispensers, therefore they can withstand repeated use. You do not have to worry about damaging the dispenser due to excessive usage.
We do recommend that you opt for a dispenser that comes with a lockable cover. Doing this would deter tampering and vandalism of the content.
Automatic soap dispensers generally operate using batteries or you have to plug them in. In case you are using a dispenser that requires electricity to operate, you would have to place it near a power socket.
This isn’t a very piratical solution. Also, the usage of electricity would add to your utility bill. A better option would to be use the battery-operated automatic dispenser. You would have to change the batteries periodically for smooth functionality.
The only possible way to avoid all this hassle is to opt for a manual soap or sanitizer dispenser. Go for the non-driven value dispensers, as there would be a mess to clean even after using them for an extended time period.
Dispensers come in a number of sizes. For high-traffic areas, we suggest you go with refillable large-size dispensers. As you would not have to refill them again and again. However, for low-traffic areas, you can opt for smaller units.